Shop by Brand: Sea-Dog

Stainless Steel Anchor Chocks for 5-20lb Anchor

Anchor Chocks help protect the surface of your deck in rough seas or while the boat is underway. Secures the anchor when not in use while still maintaining easy access. For use with conventional fluke anchors from 5-20 lbs. Constructed of corrosion resistant investment cast 316 stainless steel. Deck mounts with ten #10 FH fasteners (not included).

Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"

316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.

Specifications:

• Chain Size: 1/4" to 5/16"
• Strength: 5500lbs
• Material: Stainless Steel
• Length: 3-9/16"
• Width: 5/8"

Stainless Steel Anchor Swivel for Chain Size 5/16"-1/2"

316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.

Specifications:

• Chain Size: 5/16" to 1/2"
• Strength: 17000lbs
• Material: Stainless Steel
• Length: 4-11/16"
• Width: 13/16"

Stainless Steel Chain Gripper Plate

This Chain Gripper Plate stabilizes anchor chains and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Bow Shackles (147212) to connect lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16", and 1/2". Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two RH fasteners (not included).

Stainless Steel Chain Stopper - 3/16" - 1/4"

Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.

Stainless Steel Chain Stopper - 5/16" - 3/8"

Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.

Stainless Steel Comination Bow Light - Stamped 304 Stainless Steel - 2nm

Stainless LED Combination Bow Light (400059) is approved for USCG 2 NM (Colreg 2 mile) and is constructed of corrosion resistant stamped 304 stainless steel with a cast 316 stainless steel base. Installs with two #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Deck Step 2-1/4" x 8-3/8"

Injection Molded Rubber/Stamped 304 Stainless Steel

These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.

Stainless Steel Deck Step 3-1/4" x 8-3/8"

Injection Molded Rubber/Stamped 304 Stainless Steel

These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.

Stainless Steel Eye Mount Flagpole Pennant Clips - Set of 4

Stainless Steel Flagpole Hole Mount Pennant Clips - Set of 4 

Stainless Steel Flush Mount LED Side Lights 

LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile). Direct replacement for the 400180. One pair includes port and starboard lights. Constructed of stamped 304 stainless steel. Installs with four #8 RH fasteners (not included). 12V. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount Side Lights 

Flush Mount Side Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with four #8 RH fasteners (not included). Approved for USCG 1 NM (A-16). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED (CREE) Docking Lights 

These Docking Lights are constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Docking Lights 

LED Docking Lights feature a sleek, contemporary design. Constructed of stamped 304 stainless for corrosion resistance. 32 super bright LEDs produce 180 lumens for excellent vision when docking. Surface mounted with two #8 RH fasteners (not included). Low amp draw of 0.28A @ 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Masthead Light 

225° Masthead Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Microphone Clip

This one-piece Microphone Clip secures your microphone close to your radio. Fits all standard microphones for hailers, VHF, or CB radios. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two RH fasteners (not included).

Stainless Steel Open Base Cleat - 8"

The Open Base Cleats provide easy line tie-off and corrosion resistance in a classic style. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH thru-bolts (not included).

Stainless Steel Pulpit Flagpole 

The corrosion resistant formed 304 stainless Pulpit Flagpole fits 7/8" or 1" tubing. Each flagpole comes complete with split rings for easy flag attachment and has a polyethylene spacer to reduce scratching of the rail. Maximum speed 10 MPH. Fasteners included.

Stainless Steel Rail Mount Flagpole - 17"

The Sea-Dog® Rail Mount Flagpole is constructed of stainless steel with a UV resistant injection molded nylon rail mount bracket and split rings for easy flag attachment. Maximum speed 10 MPH.

Stainless Steel Rail Mount Flagpole - 30" 

The Sea-Dog® Rail Mount Flagpole is constructed of stainless steel with a UV resistant injection molded nylon rail mount bracket and split rings for easy flag attachment. Maximum speed 10 MPH.

Stainless Steel Rectangular Transom Light 

Rectangular Transom Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Round Transom Light 

Round Transom Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with two #8 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Side Mount Flagpole - 20" 

Side Mount Flagpole is easily removed for storage. Maximum speed 10 MPH.

Stainless Steel Side Mount LED Navigation Lights - 2 NM - Port & Starboard 

LED Side Mount Side Lights 400079 are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stern Light 

135° Stern Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Standard Wiper Motor Kit 2-1/2" - 110°

Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of powder coated aluminum and 304 stainless steel. CE compliant. 3-year warranty. 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Standard Wiper Motor Kit 2-1/2" - 80°

Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11” curved blade. Constructed of powder coated aluminum and 304 stainless steel. CE compliant. 3-year warranty. 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Steering Cable Boot 

Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Synchronized Wiper Control & Windshield Washer Kit

Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5’ wiring harness. Overload protected. CE compliant. 

This Windshield Washer Kit comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles, and mounting bracket. Tank capacity is 2.5 liters (2.66 quarts). Installs with two #10 RH fasteners (included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Synchronized Wiper Control - Powder Coated Aluminum/Stainless Steel

Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5’ wiring harness. Overload protected. CE compliant.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.