Kit Liberty Stripper Assembly - 10mm - 3/8" Chain Features:
|
Label 3500 Maxwell 3856 Round Label 3500 |
Levered Chain Stopper f/3/8" or 10mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain. 10mm (3/8"):
|
Levered Chain Stopper f/5/16" or 8mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain. 8mm (5/16"):
|
Maxwell Marine Replacement Windlass Stripper Features:
|
Motor Cima - 1200W - 12V - 4-Hole Flange
|
Motor Cima - 1200W - 24V - 4-Hole Flange
|
FOOTSWITCHES
Maxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws.
|
FOOTSWITCH
Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.
|
FOOTSWITCH
Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.
|
Pin Roll Maxwell Pin Roll spare part |
Plunger/Spring Kit - 2200-4500 Maxwell Plunger/Spring Kit for VWX - 4 of each |
PM Solenoid Pack - 12V Maxwell's PM Solenoid Pack that is 12V. |
Pressure Arm Upper 3/8" Chain Maxwell Pressure Arm Liberty 2500 3/8" Chain |
Pressure Arm Upper 8mm - 5/16" CW Features:
|
Quick Release Clip Windlass Quick Release Clip |
RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12v
Package Includes
Features
All RC Series windlasses are fitted with Maxwell's unique Wave Design chainwheel
|
RC10 Automatic Rope/Chain Windlass
|
RC10 Automatic Rope/Chain Windlass
|
RC12/10 12V Windlass
The RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2") short link chain and 20mm (3/4") three strand or 8-Plait rope (RC12-12). With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate of 15m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest windlasses in its class. A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available. The RC12 is packed with innovative features combined with Maxwell's traditionally classic aesthetics, but reflecting the modern form follows function of the highly successful RC6, RC8 and RC10 series windlasses. The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade 316 stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum. The huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Double cone-type brake/clutch mechanism permits Free Fall anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control. The RC12 features Maxwell's revolutionary and Wave Design™ chainwheel. Emergency manual retrieval is made simple and easy with Maxwell's unique Active Latch Ratchet System operation that prevents backwind of the windlass during manual hauling of the anchor. The Maxwell-designed and innovative black, hard anodized gearbox provides numerous advantages: - Fast and easy windlass installation - More corrosion resistant - Easy to maintain and service - Takes up less room in the anchor locker - 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12), single stage design with less moving parts, for smoother and quieter operation - Allows for multi-positioning of the gearbox/motor. Every Maxwell automatic rope/chain windlass comes complete with all the necessary components for fully automatic dual direction control in a competitively priced package. |
|
REMOTE UP/DOWN CONTROL
Easy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids.
|
Replacement Brush Kit for Cima 12V - 1000W-1200W Maxwell replacement brush kit for Cima 12 Volt DC 1000 - 1200 Watt windlass motors. |
Replacement Pressure Arm f/HRCFF Windlass Features:
|
Replacement Stripper Arm Assembly Kit for HRC-FF Maxwell Replacement Stripper Arm Assembly Kit specifically for HRC-FF. |
Replacement Stripper Arm for RC10 & HRC10 Maxwell replacement stripper arm specifically for RC10 and HRC10. |
Replacement Stripper for RC6/RC8 Windlass Windlass Replacement Stripper Arm Assembly Kit Applications: Maxwell RC6 and RC8 Windlass |
Reversing Solenoid Pack - 12V Maxwell Reversing Solenoid Pack 12V, replaces P19045. |
Reversing Solenoid Pack - 24V Maxwell Reversing Solenoid Pack 24V, replaces P19046. |
Screw CHSHD M8 x 6 - Stainless Steel 304 Features:
|
Seal Kit f/2200 & 3500 Series Windlass Gearboxes Kit includes:
|
Seal Kit for 800 Series
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |