A.C.E. Transducer Epoxy The perfect material for any in-hull transducer installation. A.C.E stands for Acoustically Conductive Epoxy. This will ensure the bond between the transducer and the boat hull is perfect every time. The Vexilar A.C.E. transducer adhesive works extremely well for mounting all types of transducers. Everything you need is in the package, including a pre-sized two-part system of the epoxy, a Scotch-Brite pad for surface preparation, and an alcohol wipe to clean the area. Complete instructions are on the back of the card. The package contains enough to do one transducer installation. Vexilar's A.C.E. is the right material for your fiberglass or aluminum in-hull transducer installation. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Digital Depth & Battery Gauge The FL Digital Depth Indicator is the first digital display to show depth at all times when your Vexilar flasher is on while still being able to get the status of your battery with the touch of the button. The FL Digital Depth Indicator (model DD-100) gives anglers what they have been asking for, Digital Depth. Now you can easily and quickly attach the FL Digital Depth Indicator to your transducer cable from your FL series Flasher sonar and get an instant digital depth reading. Designed to fit in place of the popular D-130 or T-130 battery indicators, Vexilar has been selling for years. You can easily outfit your Pro Pack, Ultra Pack or Genz Pack with the DD-100. The DD-100 not only gives you digital depth, but also gives you the battery status by pressing a button. When not in use, the DD-100 goes to sleep, so you no longer have to worry about draining your battery when not in use. Installation is easy. Simply unplug your transducer from the back of your Vexilar and plug into the DD-100 connector. Take the other end of the DD-100 and plug it into the back of your Vexilar. Attach the red power lead from the FL Digital Depth Indicator to the positive terminal post of your battery. A piggy-back terminal has been provided for easy connection to the Genz or Pro Pack. If you have an Ultra pack, please go to the Vexilar web site for detailed mounting instructions. Finally, place the FL Digital Depth Indicator where the old battery indicator was and attach with either plastic push pins or use a small bolt and lock nut. Features:
Specifications:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Glo-Ring Using special UV LED’s anglers are able to glow a lure treated with glow paint with only one second of exposure inside the powerful GLO-RING light chamber. Powered by your either a direct connection to your Vexilar battery via the quick connect charging cable or it can be fully adapted to get power from any carry case with supplied gator clip adapters. Even a mounting bracket comes with the GLO-RING to install on a Vexilar Genz pack or the wall of your permanent fish house. The GLO-RING can also be used as a rod holder too! WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Pro Mount Base Only For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success. The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat. Features:
Specifications:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
ProMount Quick Release Mounting Bracket For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success. The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat. Features:
Specifications:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Suppression Cable for FL-Series The S-Cable reduces the output power of the Vexilar sonar by 50% to allow clear readings in extremely shallow water. It helps reduce clutter from debris in weedy conditions too. Installation is as simple as plugging it into your transducer jack, then plugging your transducer into the other end of the S-Cable. Features:
Specifications:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |