Shop by Brand: TACO Marine

• 12" Rig Strip for any flat surface
  
• Conveniently stores pre-rigs, plugs & spoons
  
• Pre-drilled holes
  
• Made of exterior grade PVC
  
• Offered in white with marine grade peel & stick

Backing Plate for F16-0080

• Dimensions: 2-1/2"W x 4"H x 5/32"D
• Screw: #10 flat head / 1/4" hole

Backing Plate for GS-850 & GS-950

To provide strength for your Grand Slam 850 and 950 when installed to your T-top, our TACO Grand Slam Backing Plates are the answer. 

Features:

• Provides strength to base
• Matches existing base hole pattern
• No drilling
• Attractive addition to your T-top
• 5-year limited warranty

• 1-¹⁄₁₆"H x ¹¹⁄₁₆"W x 50'L
  
• Black with Black Insert

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Length: 25'
  
• "A": 1/4"
  
• "B": 1/2"
  
• Color: White

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

• Covers unfinished edges and follows almost any contour or radius
  
• Made of flexible PVC
  
• Integrated interior aluminum clip and gripping tongue ensures a better fit

Grand Slam 800 VHF Antenna Mount

The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater. 

Features:

• Safe, no-hassle raising and lowering of a VHF antenna 
• No more climbing on T-tops or gunnels 
• Machined / Anodized aluminum body 
• Light brushed finish 
• Polished Type-316L stainless steel crank handle 
• Folding crank handle locks flush into base 
• Threaded shaft for consistent lift and descent 
• Delrin bearings for smooth operation 
• Roller bearings in crank assembly 
• Mounts through up to 2" thick hardtops 
• Includes 4" x 1/4" round backing plate (hardware not included) 
• Made in the USA 
• 1-year limited warranty 

Grand Slam 850 Electric VHF Antenna Mount

Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses.

Features:

• Standard 1”-14 thread (male) shaft to accept standard VHF antennas 
• No under-mount clearance required 
• Machined / Anodized aluminum body with a light brushed finish 
• Threaded shaft for consistent lift and descent 
• Delrin bearings for smooth operation 
• Features removable set screw for manual adjustment 
• Kit includes drill template and installation instructions 
• Includes 10” lead for 12-volt DC power supply for lift and descent 
• Accepts 3A fuse in the main +12 VDC power feed (not included) 
• Sold individually 
• Made in the USA 
• 1-year limited warranty

Grand Slam 900 Anchor & Stern Light

Climbing on the boat gunnel to raise and lower an anchor and stern light is dangerous, time consuming and frustrating. The GS-900 allows boat operators to lift and descend this navigational requirement from the safety of the deck, right under the top and without ever having to climb on the gunnel again. Simply extend the crank handle and rotate the light to the upright position or back to its stowed, towing location. The light runs on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater. 

Features:

• Safe, no-hassle raising and lowering of an anchor and stern light
• Ideal for boats 39' in length or shorter (12 meters or shorter)
• Certified USCG-required for 2nm
• Standard 1"-14 thread (male) shaft 
• LED light and shaft included
• Machined/Anodized aluminum body with a light brushed finish
• Polished Type-316L stainless steel crank handle
• Folding crank handle locks flush into base
• Threaded shaft for consistent lift and descent
• Delrin bearings for smooth operation
• Roller bearings in crank assembly
• Mounts through up to 2" thick hardtops
• Includes 4" x 1/4" round backing plate (hardware not included)
• Includes 32.75" of tube
• Light tube length allows for modification by installer to exact height
• 1-year limited warranty

Grand Slam 950 Electric Anchor & Stern Light

With the simple push of a button, boaters can safely adjust the position of their Anchor & Stern Light from the comfort of the helm. Ideal for powered vessels 39’ and under (12-meters and under), the GS-950 is certified for USCG-required 2 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. The GS-950 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. 

Features:

• Machined / Anodized aluminum body with a Light-brushed finish 
• Certified for USCG-required 2-nm 
• Includes tube, light and 10” lead for 12-volt DC power supply for light function 
• Threaded shaft for consistent lift and descent 
• Delrin bearings for smooth operation 
• Features removable set pin for manual adjustment 
• Mounts to all hardtops 
• Reliable long-life LEDs 
• 6-Watt Stern Light and 12-watt Anchor 
• Low-draw, 0.6 amps per light 
• Low-voltage 12-24VDC 
• Made in the USA 
• 1-year limited warranty

• Creates a tight, rattle-free seal
  
• Adhesive backing for convenient installation
  
• Durable, flexible sponge rubber compound

• Creates a tight, rattle-free seal
  
• Adhesive backing for convenient installation
  
• Durable, flexible sponge rubber compound

Multi-Purpose 15° Portable Cleat

We've combined a cleat and a fender holder into one glorious accessory with our Multi-Purpose Portable Deck Cleat! Securely tie off lines and set fenders all in one place. Because it fits standard rod holders, this cleat is movable, stowable and a practical step forward in your boating and docking experience.

Features:

• Large S-shape 9-inch cleat design
• Accommodates up to ¾-inch dock line for larger boat applications
• Pipe diameter of 1-1/2-inch fits into standard rod holders 1-5/8-inch in diameter
• Loop hole design to hang fenders over the side
• Ideal for hanging hose while washing boat
• Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat
• 1-year limited warranty

• Safe & convenient storage
  
• Holds a pair of pliers and 2 knives
  
• Offered in white
  
• Hardware NOT Included

Rub Rail Mounted LED Navigation Light Set - 2-1/2" 

With constant innovation in mind, we've developed a line of Rub Rail-mounted LED navigation lights – sleek, low-profile lights designed to allow for cleaner, open decks with non-obstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation, have a water-resistant IP68 rating and provide hours of maintenance-free, reliable use. 

Features:

• Ideal for up to 30-foot boats and designed to fit the popular 3/4-inch insert profiles
• Special order item sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) light
• Brightness compares to 10-watt incandescent light
• Enables more deck space and easy to install
• Provides a 120-degree unobstructed view with less glare
• Meets ABYC/USCG requirements for both sail and powerboat designation
• Low-voltage 12-14VDC
• Anodized aluminum heat sink for maximum heat dissipation
• LED lights are mounted in a heavy gauge polished stainless-steel joiner cover
• Water-resistant IP68 rating
• Takes a 1-inch #8 stainless-steel fastener (not included)
• Comes with detailed installation instructions
• 1-year limited warranty

Rub Rail Mounted Navigation Lights for Boats Up To 30' - Port & Starboard Included

TACO's latest addition to it's Rub Rail offering is the Rub Rail mounted LED Navigation Light. These sleek, low-profile lights are mounted onto a heavy gauge Stainless Steel cover designed to fit several of Taco Marine's most popular Rigid Vinyl Rub Rail profiles that are ideal for 18' to 30' boats.

Features & Benefits:

• 3-Watt Port (Red) and Starboard (Green) LEDs
• Low-draw, less than 0.25 Amperes
• Enables more deck space
• Easy installation
• Stainless Steel
• High Polish
• Reliable long-life LEDs will increase hours of maintenance-free service
• Designed to fit the popular Taco Marine V21-9659, V21-9904, V21-9909 and V21-9959 Rub Rail profiles
• For use on up to 30' boats
• 120° unobstructed view, with less glare
• Meets ABYC-USCG requirements
• Low-voltage 12-14VDC
• Anodized aluminum heat sink for maximum heat dissipation
• LED lights are mounted in a heavy gauge polished Stainless Steel joiner cover
• Water-resistant, IP68 rating
• Takes a 1" - #8 Stainless Steel fastener (not included)

Kit Includes:

• Set of two LED navigation light assemblies, Port (Red) and Starboard (Green)
• Installation Instructions

Stainless Steel Mounting Bracket f/Side Mount Table Pedestal

Polished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength.

Features:

• Polished stainless steel pedestal & table support
• Anodized aluminum bracket
• Locking pull pin offers added mounting strength
• Removable 125° bent leg
• Dimensions: 4-7/8"W x 4"H x 1/2"D
• Screw: #10 flat head / 1/4" hole.

Benefits:

• Eliminates the need for mounting holes in boat deck and/or cockpit
• Easy to remove when not in use, for clear passage and storage
• Quick set-up and removal in tight spaces
• Increased leg & foot room

Surface Mount LED Side Navigation Light Set - 1-3/4"

TACO's LED selection is the Surface Mount LED Navigation Light Set – a pair of low-profile lights mounted in a heavy-gauge stainless steel cover designed to fit on flat surfaces and ideal for up to 40-foot boats.

Features:

• Ideal for boats up to 40-feet long
• Provides reliable, long-lasting LED lighting for thousands of hours of maintenance-free use
• 3-watt white LED with a low draw of only .6 amps that compares to 10-watt incandescent light
• Easy installation with marine adhesive sealants
• Designed to fit small transom areas
• Meets ABYC-USCG requirements for both sail and powerboat designation 2nm
• Low-voltage 12 to 24VDC
• Anodized cylindrical aluminum heat sink for maximum heat dissipation
• LED light is mounted in a heavy-gauge, polished stainless-steel cover for a clean and unobtrusive look
• Water-resistant IP68 rating
• 1-year limited warranty

• Universal design to fit Taco Marine's Neptune Premium, Neptune II and most standard leaning posts
  
• Arms install at desired width to fit rod holders
  
• Cool, white, easy-to-clean, cushioned backrest
  
• Arms fold for easy storage when not in use
  
• Hardware included
  
• 3 year limited warranty
  
• Made in USA

• Absorbs shock and reduces vibration
  
• Offers superior resistance to water absorption, sunlight and extreme temperatures
  
• Durable EDPM synthetic rubber compound
  
• Ideal for live-wells, exterior doors, instrument covers and electronic boxes
  
• Adhesive backing for convenient installation

• Absorbs shock and reduces vibration
  
• Offers superior resistance to water absorption, sunlight and extreme temperatures
  
• Durable EDPM synthetic rubber compound
  
• Ideal for live-wells, exterior doors, instrument covers and electronic boxes
  
• Adhesive backing for convenient installation

• Absorbs shock and reduces vibration
  
• Offers superior resistance to water absorption, sunlight and extreme temperatures
  
• Durable EDPM synthetic rubber compound
  
• Ideal for live-wells, exterior doors, instrument covers and electronic boxes
  
• Adhesive backing for convenient installation