Shop by Brand: FLIR Systems

Ethernet Cable for M-Series - 100'

FLIR's 100' Ethernet Cable is for connecting the FLIR M-Series Cameras to the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 100' long

Ethernet Cable for M-Series - 25'

FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 25' long

Ethernet Cable for M-Series - 50'

FLIR's 50' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 50' long

Ethernet Cable for M-Series - 75'

FLIR's 75' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.

Features:

• Double Shielded
  
• RJ-45
  
• LSZH
  
• 75' long

IP To Analog Video Decoder

IP to Analog Video Decoder converts IP video signal from camera to analog composite signal.

Features:

• IP to Analog Video Decoder
• Converts IP video signal from camera to analog composite signal

FLIR is the global leader in Infrared cameras, night vision and thermal imaging systems. The products play pivotal roles in a wide range of industrial, commercial and government activities in more than 60 countries.

JCU3 Compact Joystick for M100/200 - Raymarine RayNet Network

FLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings.  The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere.  The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces.

The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck.  It can be surface or flush mounted to your helm, console or bulkhead.  Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard.

The JCU-3’s keypad and rotary knob are backlit for easy viewing at night.  The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection.    The JCU-3 is compatible with FLIR M100, M200, M400, M-Series, MD-Series as well as Raymarine T200, T300and T400 camera systems.

Power Over Ethernet Injector - 12V

FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

RJ45 Waterproof Connector

FLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord.

FLIR has designed the RJ45 waterproof connector with a standard RJ45 port, and it is PoE enabled so you can connect it directly to your JCU without having to use a PoE Injector. It is designed with a sturdy waterproof enclosure to protect against the elements, meaning the connector won't be the weakest link in your thermal imaging chain. You can't control your thermal camera without FLIR's RJ45 waterproof connector.

Weather Cover for Joystick Control Unit

FLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover.

Features:

• Protective covering
  
• Protects the electronics of your Joystick Control Unit (JCU)
  
• Guards against moisture, salt and other irritants found in marine environments